SEGGER introduces compact version of J-Link for verification and test beds

The compact variants of the J-Link models are designed for minimal footprint and to mount securely and unobtrusively into development or end user equipment.?Two mounting holes and small size make it simple to place the J-Link into existing equipment housings or to reserve space for direct-to-PCB mounting. The compact J-Link models enable fixed setups to be deployed using identical features, behavior and specifications of the corresponding market-leading J-Link models.

Typical applications for the J-Link Compact models are test fixtures that are used to automate firmware verification during development. The J-Link Compact models can also be installed into development or evaluation setups for long-term test or integrated firmware reflash in the field. It is also possible to install the J-Link Compact as a module in end equipment to reduce the number of tools that service technicians must carry around.

"We are excited to open up new application fields for the J-Link by adding the compact form factor. Engineers responsible for verification, validation and test often require automated solutions, that can easily be fitted into a fixture. The J-Link Compact models offer that exactly," says Alex Gruener, CTO of SEGGER Microcontroller.

To access more information on the J-Link PLUS Compact go to:
https://www.segger.com/products/debug-probes/j-link/models/j-link-plus/

To access more information on the J-Link BASE Compact go to:
https://www.segger.com/products/debug-probes/j-link/models/j-link-base/